Kenwood K-531 Instruction Manual Download

Page: 44 / 48

K-531

Symptoms

Solution

Tuner

A radio broadcast cannot be
received.

Connect the antennas. (P.8)

Connect the black and white cords of the AM loop antenna correctly.

(P.8)
Select the broadcast band (AM or FM). (P.22)

Tune the radio to the frequency of the desired station. (P.22)

A radio broadcast has
interference from noise.

Install an outdoor antenna away from roads.

Turn off any electrical appliances that may be causing interference.

Move the System away from the TV.

Automatic presetting does
not work.

Perform automatic presetting again. (P.23)

Manually preset stations with frequencies that you can receive. (P.23)

BLUETOOTH

Pairing cannot be done.

Reduce the distance between the System and the BLUETOOTH device.

Pairing may not be possible if there are other BLUETOOTH devices

around the System. In this case, turn off the other BLUETOOTH devices.

Connection failed.

Check whether the connected audio player supports A2DP (Advanced

Audio Distribution Profile) or AVRCP (Audio/Video Remote Control
Profile). (P.14)
Disconnect and connect again. (P.25)

Delete the registered information and pair the device again. (P.25, 27)

The sound skips or
fluctuates, or the connection
is lost.

Reduce the distance between the System and the BLUETOOTH device.

Make sure there is no obstacle between the System and the

BLUETOOTH device.
Turn down the volume of the connected BLUETOOTH device.

iPod/iPhone

The iPod/iPhone cannot be
attached firmly.

Check to see whether the correct dock adapter is used. Then check to

see whether the connector between the iPod/iPhone and the System
is not damaged, and reconnect them. (P.28)

No sound can be heard from
the iPod/iPhone.

The iPod/iPhone is not properly connected. Remove the iPod/iPhone

from the System, and then connect it again. (P.28)

The iPod/iPhone cannot be
charged.

The iPod/iPhone is not properly connected. Disconnect the iPod/

iPhone from the System, and then connect it again. (P.28)

The iPod/iPhone does not
play, or the iPod/iPhone
cannot be recognized.

Reset the iPod/iPhone while disconnected from the System, then

unplug and plug the power cord. (For reset of iPod/iPhone, refer to the
Apple web site.)
The iPod/iPhone is connected to the

terminal. The

terminal

of the System does not support the iPod/iPhone connection.

Troubleshooting

K-531[E_X].indb 44

12.8.1 11:40:15 AM

Summary of Contents for K-531

















































Search results

Summary of Contents for K-531

Reviews:

Related manuals for K-531

Brands by name

Popular brands

Kenwood K-531, Instruction Manual

Search results

Summary of Contents for K-531

Reviews:

Related manuals for K-531

Brands by name

Popular brands