22
K-531
There is no sound while tuning (automatic/manual) is in progress.
z
Automatic tuning provides stereo reception while manual tuning provides monaural reception.
z
Radio
Preparation:
Connect the antenna cords. (P.8)
Listening to FM/AM radio
1
Press [TUNER/BAND] to select “FM” or “AM”.
You can also select “FM” or “AM” on the main unit by pressing
z
[INPUT]
to change the input source to “TUNER”, and then pressing
[BAND]
to
select “FM” or “AM”.
2
Press [AUTO/MONO] to select the tuning mode (automatic
search or manual search).
You can also select the tuning mode on the main unit by pressing
z
[TUNING MODE]
.
If the reception is good, select automatic search. (”AUTO” indicator
z
lights up.)
If the reception is poor, select manual search.
z
3
Press [TUNING
1
] / [TUNING
¡
] to tune into a station.
You can also tune into a station on the main unit by pressing
z
[
4
]
or
[
¢
]
.
If automatic search is selected in step
z
2
, the System automatically
tunes in to the next station. Repeat this procedure until you are
tuned in to your preferred station.
If manual search is selected in step
z
2
, press and hold the button until
you reach your desired frequency.
When a station is tuned in, “TUNED” indicator lights up. “ST.” indicator
also lights up when receiving a stereo signal (only for FM stations).
To select a preset station
Store preset stations beforehand (P.23).
Press
z
[P.CALL
4
]
or
[P.CALL
¢
]
to select the previous/next stored
station. To browse through the stored stations, press and hold the button.
Press the number buttons
z
to select the desired preset station. (P.13)
To change the display information
Press
[ DISPLAY ]
repeatedly.
Each time you press the button, the display changes as....
FM:
z
Program service name*
=
Frequency
=
Day/Clock
=
(back to the
beginning)
AM:
z
Frequency
=
Day/Clock
=
(back to the beginning)
* “NO PS” appears if the program service name is not received.
K-531[E_X].indb 22
K-531[E_X].indb 22
12.8.1 11:40:08 AM
12.8.1 11:40:08 AM
