42
K-531
42
K-531
42
K-531
Auto Power Save does not work while recording on the USB device.
z
When recording audio signals from the AUX REC OUT terminals to the other component, Auto
z
Power Save activates. To avoid the interruption of the recording due to Auto Power Save activating,
deactivate Auto Power Save (select “OFF”) or set the volume anything other than “0”.
Other settings
Setting the Auto Power Save (A.P.S.)
1
Press [MODE].
2
Press [
2
] or [
3
] to select “A.P.S. SET”, then press [ENTER].
3
Press [
5
] or [
∞
] to select “ON” or “OFF”, then press [ENTER].
ON
:
Activates the auto power save if no operation is performed for
15 minutes in the following conditions.
The volume is set to 0 (“VOLUME 0”) or sound is muted.
z
Disc or USB device is not played with the target input source
z
(“CD” or “USB”) selected.
BLUETOOTH device is not connected with “BLUETOOTH”
z
source selected.
iPod/iPhone is not connected with “iPod” source selected.
z
No audio signals come in and “UNLOCK” appears on the
z
display with “D-IN” source selected.
OFF
:
Deactivates the auto power save.
K-531[E_X].indb 42
K-531[E_X].indb 42
12.8.1 11:40:14 AM
12.8.1 11:40:14 AM
