53
DVR-8100 (EN)
Operations
SAT/CABLE input
1
AUTO
2
COAXIAL
3
OPTICAL
4
ANALOG
VCR input
1
AUTO
2
COAXIAL
3
OPTICAL
4
ANALOG
Speaker setting
1
Play a disc marked “Dolby Digital”.
3
2
Select the speaker.
REAR
CENTER
FRONT
SW
3
Press the TRIM (
5
/
∞
) key to set-
ting the speaker level.
5
∞
TRIM
1
Select the SAT, CABLE or VCR key.
SAT
2
Press the INPUT MODE key.
INPUT MODE
RANDOM
Level setting using a music source
A music source can be used for speaker level setting and subwoofer level setting.
Speaker level adjustment can be performed by press-
ing the keys FRONT, CENTER, REAR, and SW.
FRONT: Front speakers
Switching is done as follows each time the switch is
pressed.
1
L ch : Left speaker
2
R ch : Right speaker
CENTER: Center speaker
REAR:
Rear (Surround) speakers
Switching is done as follows each time the switch is
pressed.
1
RS ch : Right surround speaker
2
LS ch : Left surround speaker
SW: Subwoofer
The speaker level can be changed in the range from -10 dB to
+10 dB.
Changing the INPUT MODE
Changing the INPUT MODE
The input mode can be switched with SAT/CABLE and VCR.
For better sound quality, connect the digital output of your component with a coaxial or optical cable. AUTO input
mode continually checks the input signal. If more than one type of cables are connected, AUTO gives priority to
OPTICAL, COAXIAL, then ANALOG. If the input mode you desire is not selected, change as follows.
Each press switches the mode.
Note
Note
When the video is displayed, but no sound is put out,
the source may not contain digital audio. In such a
case, please switch to ANALOG.
or
VCR
CABLE
or
*5290/51-56/EN
02.6.21, 10:51 AM
53
