20
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
AUDIO SETTINGS
LOUDNESS
LEVEL1
/
LEVEL2
: Selects your preferred low and high frequencies boost to
produce a well-balanced sound at a low volume level. ;
OFF
: Cancels.
SUBWOOFER SET
ON
: Turns on the subwoofer output. ;
OFF
: Cancels.
FADER
(Not applicable if 3-way crossover is selected.)
R15
to
F15
(
0
): Adjusts the rear and front speaker output balance.
BALANCE
L15
to
R15
(
0
): Adjusts the left and right speaker output balance.
VOLUME OFFSET
LEVEL –15
to
LEVEL +6
(
LEVEL 0
): Preset the initial volume level of each
source. (Before adjustment, select the source you want to adjust.)
SOUND EFFECT
SOUND RECNSTR
(Sound
reconstruction)
(Not applicable for RADIO source and AUX source.)
ON
: Creates realistic sound by compensating the high-frequency components
and restoring the rise-time of the waveform that are lost in audio data
compression. ;
OFF
: Cancels.
SPACE ENHANCE
(Not applicable for RADIO source.)
SMALL
/
MEDIUM
/
LARGE
: Virtually enhances the sound space. ;
OFF
: Cancels.
SND REALIZER
LEVEL1
/
LEVEL2
/
LEVEL3
: Virtually makes the sound more realistic. ;
OFF
: Cancels.
STAGE EQ
LOW
/
MIDDLE
/
HIGH
: Virtually adjust the sound position heard from the
speakers. ;
OFF
: Cancels.
DRIVE EQ
ON
: Boosts the frequency to reduce the noise heard from outside the car or
running noise of the tyres. ;
OFF
: Cancels.
SPEAKER SIZE
Depending on the crossover type you have selected
( 6)
, 2-way crossover
or 3-way crossover setting items will be shown.
( 21, 22)
By default, 2-way crossover type is selected.
X’OVER
DTA SETTINGS
For settings,
22, 23, Digital Time Alignment settings
.
CAR SETTINGS
•
For 2-way crossover:
[SUB-W LEVEL]
/
[SUBWOOFER SET]
is selectable only if
[SWITCH PREOUT]
is
set to
[SUBWOOFER]
.
( 5)
•
[SUB-W LEVEL]
is selectable only if
[SUBWOOFER SET]
is set to
[ON]
.
While listening to any source...
1
Press the volume knob to enter
[FUNCTION]
.
2
Turn the volume knob to select an item (see the following
table), then press the knob.
3
Repeat step
2
until the desired item is selected or activated.
4
Press and hold
to exit.
To return to the previous setting item, press
.
Default:
XX
AUDIO CONTROL
SUB-W LEVEL
LEVEL –50
to
LEVEL +10
(
LEVEL 0
): Adjusts the
subwoofer output level.
MANUAL EQ
The sound elements (frequency level, tone level,
Q factor) are preset into each selection.
62.5HZ
LEVEL
LEVEL –9
to
LEVEL +9
(
LEVEL 0
): Adjusts
the level to memorize for each source.
(Before making an adjustment, select the
source you want to adjust.)
BASS
EXTEND
ON
: Turns on the extended bass. ;
OFF
: Cancels.
100HZ/160HZ/250HZ/
400HZ/630HZ/1KHZ/
1.6KHZ/2.5KHZ/4KHZ/
6.3KHZ/10KHZ/16KHZ
LEVEL –9
to
LEVEL +9
(
LEVEL 0
): Adjusts the level
to memorize for each source. (Before making an
adjustment, select the source you want to adjust.)
Q FACTOR
1.35
/
1.50
/
2.00
: Adjust the quality factor.
PRESET EQ
NATURAL
/
ROCK
/
POPS
/
EASY
/
TOP40
/
JAZZ
/
POWERFUL
/
USER
: Selects a preset equalizer suitable
to the music genre. (Select
[USER]
to use the settings
made in
[MANUAL EQ]
.)
BASS BOOST
LEVEL1
/
LEVEL2
/
LEVEL3
/
LEVEL4
/
LEVEL5
: Selects
your preferred bass boost level. ;
OFF
: Cancels.
JS_KWD_DPX_5100BT_EN_EN_4.indd 20
JS_KWD_DPX_5100BT_EN_EN_4.indd 20
8/15/2017 9:10:42 AM
8/15/2017 9:10:42 AM
