Kenwood DNX570TR, Quick Start Manual

Page: 26 / 219

26
Quick Start Guide
Connecting wires to terminals
Fuse (10A)
A
A
+
+
+
+
MUTE
ILLUMI
P. CONT
ANT CONT
STEERING WHEEL
REMOTE INPUT
REMOTE CONT
White/Black
Gray/Black
Green/Black
Purple/Black
Speaker impedance: 4-8 Ω
Purple
Green
Gray
White
To front
left
speaker
To front
right
speaker
To rear
left
speaker
To rear
right
speaker
Red (Ignition wire)
Black (Ground wire)
(To car chassis)
Yellow (Battery wire)
To use the steering wheel remote
control feature, you need an
exclusive remote adapter (not
supplied) matched to your car.
Light Blue/Yellow
(Steering remote control
wire)
Orange/White
(Dimmer control wire)
Brown
(Mute control wire)
Blue
(Antenna control wire)
Blue/White
(Power control wire)
Connect to the terminal that
is grounded when either the
telephone rings or during
conversation.
To use the Mute feature, you
need to hook up this wire to your
telephone by using a commercial
telephone accessory.
Depending on what antenna you
are using, connect either to the
control terminal of the motor
antenna, or to the power terminal
for the booster amplifier
of the film-type antenna.
(Max. 300mA, 12V)
When using the optional power
amplifier, connect to its power
control terminal.
If no connections are made,
do not let the cable come out from the tab.
To steering remote
To car light control switch
Ignition key
switch
Car fuse box
(Main fuse)
Car fuse
box
ACC
Battery
Accessory
1