Kenwood DMC-S9NET, Operation Manual

Page: 133 / 136

PORTABLE MD RECORDER DMC-S9NET
ENGLISH OPERA
TION MANUAL
133
DMC-S9NET B60-5436-08
7. Select "GROUP EDIT" by pressing the or
button and press the ENTER button.
8. Select "TOP MOVE" by pressing the or but-
ton and press the ENTER button.
9. Press the ENTER button.
The group is moved to the top.
Positioning non-group tracks after group-recorded
tracks
(GROUP ARRANGE) (page 85)
[Operate with the battery charge stand.]
1. Insert a group-recorded MiniDisc.
2. While in the stop mode, press the MENU button.
3. Select "GROUP EDIT" by pressing the
or
button and press the ENTER button.
4. Select "ARRANGE" by pressing the or but-
ton and press the ENTER button.
5. Press the ENTER button.
Non-group tracks are moved behind the grouped ones.
Erasing a group
(GROUP ERASE) (page 86)
[Operate with the battery charge stand.]
1. Insert a group-recorded MiniDisc.
2. While in the stop mode, press the MENU button.
3. Select "GrSELECT" by pressing the
or but-
ton and press the ENTER button.
4. Press the ENTER button.
" " will flash.
5. Within 5 seconds, select the group to erase by pressing
the or button.
6. When " " lights on, press the MENU button.
7. Select "GROUP EDIT" by pressing the or
button and press the ENTER button.
8. Select "Gr&TrERASE" by pressing the or
button and press the ENTER button.
9. Press the ENTER button.
The group is erased.
Erasing group information
(GROUP CANCEL)
(page 87)
[Operate with the battery charge stand.]
1. Insert a group-recorded MiniDisc.
2. While in the stop mode, press the MENU button.
3. Select "GROUP EDIT" by pressing the
or
button and press the ENTER button.
4. Select "CANCEL" by pressing the or button
and press the ENTER button.
5. Press the ENTER button.
The group information is erased.
SETTING THE ALARM
(pages 88 - 89)
[Operate with the remote control.]
1. During playback or while in the stop mode, press the
MENU button.
2. Select "ALARM" by pressing the or button
and press the button.
3. Select "ALARMon" by pressing the or button
and press the button.
4. Select the time by pressing the or button
and press the button.
You can select the time from 1 to 99 minutes.
When the set time comes:
The alarm beeps repeatedly for one minute from the
headphones.
To stop the beep sound:
Press any button on the remote control or the main unit.
To change the alarm time:
Repeat the operation from step 1.
To cancel the alarm setting:
Select
"
ALARMoff
"
in step 3.