manualshive.com logo in svg

Kenwood DDX8016DABS, Instruction Manual

Share
Download
Kenwood DDX8016DABS Instruction Manual Download Page 81

ENGLISH

81

 

❏

Digital Radio (DAB) (only for 

DDX8016DABS)

Cannot receive an ensemble.

•  Your area is not covered by the ensemble.
The DAB aerial is not properly extended or 

positioned.

•  Adjust the aerial and try the ensemble scanning 

again.

•  Connect an active aerial (not supplied).

 

❏

AV-IN

No picture appears on the screen.

•  Turn on the video component if it is not on.

•  Connect the video component correctly.

 

❏

Android Auto*/Apple CarPlay

Desired source (“Android Auto”/“Apple CarPlay”) 

is not displayed on the Home screen.

•  Check whether the connected device is 

compatible with CarPlay or Android Auto.

•  When iPhone compatible with CarPlay is 

connected, check the [CarPlay Connection] 

setting. (Page 25)

Navigation does not work for “Apple 

CarPlay”/“Android Auto”.

•  Connect the GPS antenna firmly. (Page 73)

*

  Android Auto is available only for DDX9716BTS/DDX9716BTSR.

 

❏

Bluetooth

Phone sound quality is poor.

•  Reduce the distance between the unit and the 

Bluetooth mobile phone.

•  Move the car to a place where you can get a better 

signal reception.

The sound is interrupted or skipped while using a 

Bluetooth audio player.

•  Reduce the distance between the unit and the 

Bluetooth audio player.

•  Disconnect the device connected for Bluetooth 

phone.

•  Turn off, then turn on the unit.

(When the sound is not yet restored) connect the 

player again.

The connected audio player cannot be 

controlled.

•  Check whether the connected audio player 

supports AVRCP (Audio/Video Remote Control 

Profile).

The Bluetooth device does not detect the unit.

•  Search from the Bluetooth device again.
The unit does not pair with the Bluetooth device.

•  For devices compatible with Bluetooth 2.1: 

Register the device using a PIN code. (Page 41)

•  For devices compatible with Bluetooth 2.0: 

Enter the same PIN code for both the unit and 

target device. If the PIN code of the device is not 

indicated in its instructions, try “0000” or “1234.”

•  Turn off, then turn on the Bluetooth device.

Echo or noise occurs.

•  Adjust the microphone unit position.

•  Adjust the echo volume or noise reduction 

volume. (Page 44)

The unit does not respond when you try to copy 

the phone book to the unit. 

•  You may have tried to copy the same entries (as 

stored) to the unit.

REFERENCES

Summary of Contents for DDX8016DABS

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands