ENGLISH
69
CONNECTION/INSTALLATION
❏
Supplied accessories for installation
1
Wiring harness × 1
2
Trim plate × 1
3
Extraction keys × 2
4
USB extension cable
(1.0 m) × 1
5
GPS antenna
(3.5 m) × 1
6
Metal plate × 1
7
Microphone (3 m) × 1
❏
Installation procedure
1
To prevent a short circuit, remove the key
from the ignition and disconnect the
“
battery.
2
Make the proper input and output wire
connections for each unit.
3
Connect the speaker wires of the wiring
harness.
4
Take Connector B on the wiring harness
and connect it to the speaker connector in
your vehicle.
5
Take Connector A on the wiring harness
and connect it to the external power
connector in your vehicle.
6
Connect the wiring harness connector to
the unit.
7
Install the unit in your car.
• Make sure that the unit is installed securely
in place. If the unit is unstable, it may
malfunction (e.g., the sound may skip).
8
Reconnect the
“
battery.
9
Configure
<Initial SETUP>. (Page 4)
Installing the unit
❏
Installing the unit
• Bend the tabs of the mounting sleeve with a
screwdriver or similar utensil and attach it in place.
❏
Installing the trim plate
Attach the trim plate (
2
).
2
Summary of Contents for DDX8016DABS
Page 39: ...ENGLISH 39 ...
Page 88: ......