Kenwood DDX8016DABS, Instruction Manual

Page: 37 / 88

ENGLISH 37
OTHER EXTERNAL COMPONENTS
❏
Displaying the picture from the camera
The camera screen is displayed when you shift the
gear to the reverse (R) position.
• To erase the operation buttons, touch the screen.
Touching the screen again displays the operation
buttons.
To display the picture from the camera manually
• When [Front Camera] is set to [ON], the picture
from the front view camera is displayed. When
[Front Camera] is set to [OFF], the picture from
the rear view camera is displayed.
On the touch panel:
Select [Camera] on the pop-up short-cut menu.
(Page 13)
On the monitor panel:
DDX9716BTS
DDX9716BTSR
DDX8016DABS
To switch the screen between the front view
camera and the rear view camera
• Each time you touch the button, the screen is
switched between the rear view screen and the
front view screen.
To exit the camera screen
Using external audio/video
players—AV-IN
When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page 58.
❏
Starting playback
1
Connect an external component.
(Page 72)
• For DDX9716BTS/DDX9716BTSR: Connect
an external component to the AV-IN input
terminal.
• For DDX8016DABS: Connect an external
component to the AV-IN1 or AV-IN2 input
terminal.
2
Select the source to play an external
component. (Page 12)
• For DDX9716BTS/DDX9716BTSR: Select “AV-
IN” as the source.
• For DDX8016DABS: Select “AV-IN1” or
“AV-IN2” as the source.
3
Turn on the connected component and
start playing the source.