Kenwood DDX5024 Page 90 Instruction Manual Download

Page: 90 / 96

DNX5240BT/DNX5240/DDX5024/DDX5054/DDX54R

Some functions of this unit may be disabled by
some settings made on this unit.

• Cannot set up the subwoofer.

• Cannot set up subwoofer phase.

• No output from the subwoofer.

• Cannot set up the low pass filter.

• Cannot set up the high pass filter.

▲

Subwoofer is not set to On.

☞

(page 56)

▲

Preout is set to "Rear".

☞

<System Setup> (page

60)

▲

The Dual zone function is enabled.

☞

<Zone

Control> (page 80)

Cannot set up the subwoofer phase.

▲

Subwoofer is not set to On.

☞

(page 56)

▲

Low pass filter is set to Through.

☞

<Crossover

Network Setup> (page 57)

• Cannot select the output destination of the

subsource in the Dual zone.

• Cannot adjust the volume of the rear

speakers.

▲

The Dual zone function is disabled.

☞

<Zone

Control> (page 80)

Cannot play audio files.

▲

"CD Read" of <System Setup> (page 60) is set

to "2".

Cannot Folder select.

▲

The Scan play or Random play function is

enabled.

Cannot perform Repeat play.

▲

The PBC function is enabled.

• Cannot set up the equalizer.

• Cannot set up the crossover network.

▲

The Dual zone function is enabled.

☞

<Zone

Control> (page 80)

Cannot watch the source selected as AV-OUT

in the rear monitor.

▲

A source control screen is displayed in front.

☞

<AV lnterface Setup> (page 62)

▲

"AV-OUT Graphic Output" of <AV Interface

Setup> is set to "Black".

What might seem to be a malfunction in your unit
may just be the result of slight misoperation or
miswiring. Before calling service, first check the
following table for possible problems.

General

The Touch Sensor Tone doesn’t sound.

✔

The preout jack is being used.

☞

The Touch Sensor Tone can’t be output from

the preout jack.

Tuner source

Radio reception is poor.

✔

The car antenna is not extended.

☞

Pull the antenna out all the way.

✔

The antenna control wire is not connected.

☞

Connect the wire correctly, referring to the

section on <INSTALLATION MANUAL>.

Disc source

The specified disc does not play, but another

one plays instead.

✔

The specified disc is quite dirty.

☞

Clean the disc.

✔

The disc is severely scratched.

☞

Try another disc instead.

Audio file source

The sound skips when an Audio file is being

played.

✔

The media is scratched or dirty.

☞

Clean the media, referring to the CD
cleaning of the section on <Handling discs>
(page 6).

✔

The recording condition is bad.

☞

Record the media again or use another

media.

Navigation

The touch panel control of the navigation

system does not work.

✔

Navigation software is not the latest version.

☞

Update the navigation software. For how to
update the software, refer to the instruction
manual of the navigation unit.

Help?

Troubleshooting

B64-4258-00̲00.indb 90

08.10.30 7:28:51 PM

Summary of Contents for DDX5024

































































































Search results

Summary of Contents for DDX5024

Reviews:

Related manuals for DDX5024

Brands by name

Popular brands

Kenwood DDX5024, Instruction Manual

Search results

Summary of Contents for DDX5024

Reviews:

Related manuals for DDX5024

Brands by name

Popular brands