Kenwood DDX5024 Instruction Manual Download Page 82

Page: 82 / 96

DNX5240BT/DNX5240/DDX5024/DDX5054/DDX54R

Remote Controller

For DDX5054/DDX54R : This unit can be operated using the Remote Controller (RC-DV340) supplied with
this unit.
For DNX5240BT/DNX5240/DDX5024 : Optional Remote Controller KNA-RCDV330 is designed for controlling
this unit.

•

Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could

result, if the Remote Controller falls down and gets wedged under the pedals while driving.

•

Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may cause the battery to leak

fluid. If spilled fluid comes in contact with your eyes or on clothing, immediately rinse with water and consult a physician.

•

Place the battery out of reach of children. In the unlikely event that a child swallows the battery, immediately consult a

physician.

Battery installation

Use two "AAA"/"R03"-size batteries.
Insert the batteries with the + and – poles aligned
properly, following the illustration inside the case.

⁄

• If the Remote Controller operates only over shorter

distances or does not operate at all, it is possible that
the batteries are depleted. In such instances, replace the
both batteries with new ones.

Remote Controller mode switch

The functions operated from the remote
controller differ depending on the position of the
mode switch.

TER

DVD•

T V•

AUD•

DVD mode

Switch to this mode when
playing DVDs or CDs etc.
with the player integrated in
this unit.

AUD mode

Switch to this mode when
controlling a selected source
or tuner source, etc.

TV mode

Switch to this mode when
controlling TV.

⁄

• The position of the remote control mode switch is

indicated in the title of each mode, e.g., "(AUD mode)".

• When controlling a player that is not integrated in the

unit, select "AUD" mode.

CAUTION

•

Do not leave the battery near fire or under direct sunlight. A fire, explosion or excessive heat generation may result.

B64-4258-00̲00.indb 82

08.10.30 7:28:35 PM

Summary of Contents for DDX5024

































































































Search results

Summary of Contents for DDX5024

Reviews:

Related manuals for DDX5024

Brands by name

Popular brands

Kenwood DDX5024, Instruction Manual

Search results

Summary of Contents for DDX5024

Reviews:

Related manuals for DDX5024

Brands by name

Popular brands