Clock settings
1
Display the Home screen.
2
Display the <Clock> screen.
On the Home screen, touch as follows:
Then, on the
<Setup>
screen, touch as follows:
[System]
A
<Clock> : [Enter]
• You can also display the
<Clock>
screen by
touching the clock area on the Home screen.
3
Set the clock time.
Clock
Synchronize
AM10
28
:
Reset
Radio Data System
E.g. Clock settings screen for
DDX395
<Synchronize>
•
Radio Data System:
Synchronizes the clock time
with FM RBDS.
•
OFF:
Sets the clock manually. Touch
[
J
]/[
K
]
to
adjust the hour, then minute.
–
Touching
[Reset]
will set the minute to “00”.
Getting Started
Getting Started
4
Repeat step 3 to confirm your security
code.
Now, your security code is registered.
To clear the registered security code:
touch
[CLR]
for
<Security Code>
in step 2.
Then, enter the current security code to clear and
touch
[Enter]
.
• When the unit has been reset or disconnected from
the battery, you are required to enter the security
code. Enter the correct security code, then touch
[Enter]
.
Activating the security function
You can activate the security function to protect your
receiver system against theft.
1
Display the <Setup> setting screen.
On the Home screen, touch as follows:
2
Activate the security function.
On the
<Setup>
setting screen, touch as follows:
[System]
A
<SI>: [ON]
The security function is activated.
The security indicator on the monitor panel flashes
when the vehicle ignition is off.
To deactivate the security function:
Touch
[OFF]
in
step 2.
Setting the security function
Registering a security code
(Only for DDX418BT)
1
Display the Home screen.
2
Display the <Security Code Set> screen.
On the Home screen, touch as follows:
Then, on the
<Setup>
screen, touch as follows:
[System]
A
<Security Code> : [Set]
3
Enter a four-digit number (
1
), then
confirm the entry (
2
).
• To delete the last entry, touch
[Clear]
.
• To cancel the setting, touch
[Cancel]
.
6
ENGLISH
EN̲DDX2018ST̲KR.indb 6
2017/05/17 9:27
