Kenwood CS-1045, Instruction Manual

Page: 4 / 35

SPECIFICATIONS
C S - 1 0 6 5 C S - 1 0 4 5
C R T
150TTM31
Rectangular, with internal graticule
150TTM31
Rectangular, with internal graticule
Acceleration Voltage 12 kV
Display Area
8 x 10 div (1 div = 10 mm)
V E R T I C A L A X I S CH1 and C H 2
Sensitivity
1 mV/div to 5 V/div, ± 3 %
Attenuator 12 steps, 1 mV/div to 5 V/div in 1 -2-5 sequence.
Vernier control for fully adjustable sensitivity between steps.
Input Impedance 1 Mfi ± 2 % , approx. 2 0 pF
Frequency Response
5mV/div to 5V/div DC; DC to 6 0 MHz, - 3 dB
A C ; 5 Hz to 60 MHz, - 3 dB
DC; DC to 4 0 MHz, - 3 dB
A C ; 5 Hz, to 4 0 MHz, - 3 dB
1 mV/div, 2 mV/div DC; DC to 20 MHz, - 3 dB
A C ; 5 Hz to 20 MHz, - 3 dB
DC; DC to 1 5 MHz, - 3 dB
A C ; 5 Hz to 1 5 MHz, - 3 dB
Rise Time
5.8 nsec or less (5 mV/div to 5 V/div)
17.5 nsec or less (1 mV/div, 2 mV/div)
8.8 nsec or less (5 mV/div to 5 V/div)
23.4 nsec or less (1 mV/div, 2 mV/div)
Signal Delay Time Approx.20 nsec on the C R T screen
Crosstalk — 4 0 dB minimum
Operating Modes C H 1 ; single trace
C H 2 ; single trace
DUAL; CH1 and C H 2 , dual trace
ADD; CH1 + C H 2 added as a single trace
TRIPLE; C H 1 , CH2 and C H 3 triple trace
Chop Frequency
Approx. 2 5 0 kHz
Channel Polarity Normal or inverted, channel 2 only inverted
/ \ Maximum Input voltage
5 0 0 Vp-p or 2 5 0 V (DC + A C peak)
Non-Distorted Maximum Amplitude More than 8 div (DC to 60 MHz)
More than 8 div (DC to 4 0 MHz)
V E R T I C A L A X I S C H 3
Sensitivity
0.5 V/div ± 3 %
Input Resistance
1 Mi) ± 2 %
Input Capacitance
Approx 20 pF
Frequency Response
DC: DC to 60 MHz, - 3 dB DC: DC to 4 0 MHz, - 3 dB
Rise Time
5.8 nsec or less 8.8 nsec or less
Signal Delay Time
Same as CH1 and C H 2
$ \ Maximum Input Voltage 50 V (DC + A C peak)
H O R I Z O N T A L A X I S
Input thru C H 2 , x 10 MAG not included
Operating Modes
With H0RIZ MODE switch, X - Y operation is selectable
C H 1 ; Y axis
C H 2 ; X axis
Sensitivity
Same as vertical axis (CH2)
4