background image

4

Read the instructions carefully before installing and using the appliance.

CAUTION: This apparatus must only be installed in a permanently ventilated room in 

compliance with the applicable regulations.

Dear Customer, 

Thank you for having purchased and given your preference to 

our product. The safety precautions and recommendations within 

this booklet are for your own safety and that of others. They will also 

provide a means by which to make full use of the features offered 

by your appliance.

Please preserve this booklet carefully. It may be useful in future, 

either to yourself or to others in the event that doubts should arise 

relating to its operation.

This appliance must be used only for the task it has ex-

plicitly been designed for, that is for cooking foodstuffs. Any 

other form of usage is to be considered as inappropriate and 

therefore dangerous.

The manufacturer declines all responsibility in the event 

of damage caused by improper, incorrect or illogical use of the 

appliance.

Important:

This appliance is designed and manufactured solely for the cooking of domestic (hou-

sehold) food and is not suitable for any non domestic application and therefore should 

not be used in a commercial environment.

This appliance guarantee will be void if the appliance is used within a non domestic 

environment i.e. a semi commercial, commercial or communal environment.

Summary of Contents for CK 409

















































Reviews: