manualshive.com logo in svg

Kenwood CK 409, Instructions For Use - Installation Advice, Page: 23 / 48

Share
Download
Kenwood CK 409 Instructions For Use - Installation Advice Download Page 23

23

  5 - CONVENTIONAL OVEN (RIGHT OVEN)

GENERAL FEATURES

The conventional oven is provided with 3 

heating elements which are:
• 

Bottom element  

  735 W

• 

Top element   

  640 W

• 

Grill element   

1330 W

NOTE:

Upon first use, it is advisable to operate the 

oven at the maximum temperature (ther-

mostat knob on position 250) for 60 minu-

tes in the position   and for another 15 

minutes in the position   (thermostat knob 

on position 225°C), to eliminate possible 

traces of grease on the heating elements.

Clean the oven and accessories with warm 

water and washing-up liquid.

OPERATING PRINCIPLES

Heating and cooking in the 

CONVENTIO-

NAL

 oven are obtained in the following 

ways:
a. 

by natural convection

 

The heat is produced by the upper and 

lower heating elements.

b. 

by radiation

 

The heat is radiated by the infrared 

grill element.

ATTENTION: The oven door becomes 

very hot during operation.

Keep children away.
Very important: The oven must always 

be used with the oven 

door CLOSED.

WARNING:

 

The door is hot, use the 

handle.
During use the appliance becomes 

hot. Care should be taken to avoid 

touching heating elements inside the 

oven.

Summary of Contents for CK 409

















































Reviews:

No comments