Use the roto food cutter to slice and
shred such foods as carrot,
cucumber, cabbage, apples, potato
and cheese.
before using your Kenwood
attachment
●
Read these instructions carefully and
retain for future reference.
●
Remove all packaging.
safety
●
Never put your fingers in the feed
tube. Only use the pusher supplied
with the roto food cutter attachment.
●
Do not use excessive force to push
the food down the feed tube - you
could damage your attachment.
●
Handle the drums with care, they are
extremely sharp.
●
Do not touch moving parts.
●
Unplug the appliance before fitting or
removing parts or cleaning.
Refer to your main Kitchen Machine
instruction book for additional safety
warnings.
before using for the first time
1 Wash the parts: see ‘Cleaning’.
key
pusher
feed tube and body
drum retainer
drums
to assemble your
roto food cutter
assembly
1 Select a drum. The drums are
numbered at the back and used as
follows:
●
Drum No 1
- For fine shredding :-
chocolate, nuts, carrot and cheese.
●
Drum No 2
- For coarse
shredding :- chocolate, nuts, carrot
and cheese.
●
Drum No 3
- For thin slicing :-
onion, cabbage, cucumber, carrot,
apples, potato and chocolate.
●
Drum No 4
- For thick slicing :-
onion, cabbage, cucumber, carrot,
apples, potato, chocolate and
beetroot.
●
Drum No 5 (Rasping drum)
-
For grating parmesan cheese and
potato for German potato
dumplings.
2 Fit the drum into the body of the
roto food cutter.
3 Lock the drum retainer in position by
turning anti-clockwise until the
locating line is directly underneath
the line on the body
.
to use your
roto food cutter
1 Remove the outlet cover by pressing
its top then lifting off
.
2 With the roto food cutter in the
position shown
, locate in the
outlet. Rotate the roto food cutter so
that the feed tube is upright.
3 Place a collecting vessel beneath the
outlet.
4 Fill the feed tube to prevent food
from slipping sideways during
processing. Switch onto speed 3 - 4
and gently push down with the
pusher. Note: The pusher will only fit
one way.
English
2
