3
Cummins 6.7 Liter 4500 and 5500
1.
Remove Plastic Engine Cover
2.
Remove the EGR exhaust pipe temperature sensor. Attach DFS 910-2 to the
temperature port.
3.
Attach DFS 910-5 to DFS 910-2. Attach Blue and Black hoses to DFS 910-5.
4.
Start vehicle engine. Set air Pressure on Atomizer Tank to 80 psi.
5.
Turn Atomizer valve to ON position on the machine. Open the Air valve on
the DFS 910-5
6.
After 1 lit/qt disconnect the wire connector on the EGR valve run until Atomizer fluid
tank is empty.
7.
Turn Atomizer valve of and Fill the Atomizer Tank with 1 lit/qt Rinse Solution and
repeat the above steps.
8.
Turn Atomizer Valve and Air valve on DFS 910-5 to OFF position. Turn Vehicle off,
turn fuel pump off on the machine. Disconnect fuel hoses, adapters and reattach the
EGR exhaust pipe temperature sensor and fuel lines. Reconnect the wire connector to
EGR valve.
Mercedes Benz/Jeep 3.0 Liter
1.
Remove Plastic Engine Cover
2.
Remove Turbo Boost Pressure sensor on the intake.
3.
Attach adapter DFS 910-8 to the Pressure sensor opening.
4.
Attach DFS 910-5 to DFS 910-8. Attach Blue and Black hoses to DFS 910-5
5.
Start vehicle engine. Set air Pressure on Atomizer Tank to 80 psi.
6.
Turn Atomizer valve to ON position on the machine, and open air valve on DFS 910-
5
7.
After 2 lit/qt turn Atomizer valve to OFF position on the machine, and turn air valve off
DFS 910-5.
8.
Turn Atomizer valve of and Fill the Atomizer Tank with 1 lit/qt Rinse Solution and repeat
the above steps.
DFS 910-2
DFS 910-5