Kentrox RMX-3200, Configuration Manual

Page: 129 / 388

Remote RMX-3200 Version 5.2x Configuration Guide
Configuring Technician Laptop Access for Remote RMX-3200: Configuration Overview
13-3
When the technician’s laptop is connected to one of the Ethernet ports on Remote
RMX-3200, the DHCP server automatically assigns an IP address to the laptop. IP
addresses that may be assigned to the technician’s laptop are configured using
DHCP server configuration commands in the Remote RMX-3200 CLI. For more
information on configuring the DHCP server, refer to section
Assigning IP Addresses
to Technician Laptops on page 13-4 .
IPTables is configured for Network Address Translation (NAT) to allow multiple
laptops to use private IP addresses on the local network and a single public IP
address on the WAN. For more information on configuring IPTables and NAT, refer to
section
Configuring IPTables for Network Address Translation on page 13-6 .
Tip: If you have available public IP addresses, DHCP can assign them to connected
laptops, which lets you skip the IPTables configuration.