4
INTRODUCTION
Congratulations
on your purchase. The
PRO CV to MIDI
is a high specification, fully configurable control
voltage to MIDI converter, capable of tracking pitch Control Voltages very accurately, be it Volt/Octave,
1.2V/Octave or Hz/Volt. It also supports pitch bend, modulation and non-quantised continuous tracking
in addition to two user-assignable auxiliary CV inputs.
The
PRO CV to MIDI
also includes an intelligent auto tune feature, to make it as easy as possible to set
up with your analogue equipment.
CONNECTIONS
MIDI OUT
Plug your receiving MIDI device in here.
(This socket also serves as a MIDI input for updating the firmware)
CV (-3V to +10.65V usable range)
Plug your pitch CV connection in here. The scale type (V/Oct, Hz/V, 1.2V/Oct) is set using the menu.
GATE / S-TRIG
Plug your gate connection in here. The gate type (Gate / S-Trig) is set using the menu.
AUX 1 & AUX 2 (0V to +10V usable range)
Plug auxiliary inputs in here. These two sockets are assignable to a number of different functions, such
as MIDI CCs, Note Velocity, MIDI Clock and more
–
see parameters 30 & 40
.
DC IN 9V
Plug your power adapter into here. The converter will take an adapter with an output of 9 volts DC
regulated or unregulated, ve. The Pro CV to MIDI is supplied with a power supply suitable for
the destination country. Other power supplies can be used as long as their output is 9 volts DC regulated,
can supply at least 100mA and have 2.1mm ve plug.
WARNING:
Do not use an adaptor with an output voltage higher than 9V. The
PRO CV to MIDI
must not share an adaptor with
any other device. Failure to observe this will invalidate your warranty, and will probably damage the other device, the
PRO CV to
MIDI
and/or the power supply.
Analogue synth
/ sequencer etc.
Pro CV to MIDI
Gate
Pitch CV
Aux CV 1
Aux CV 2
MIDI synth /
computer etc.
MIDI Out
9V external power adapter
