background image

3

 

 

FCC Statement for PRO CV to MIDI

 

 
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant  to  Part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide  reasonable  protection 
against harmful interference in a residential installation. This equipment generates, uses and can radiate 
radio frequency energy and, if not installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and on, the user is encouraged to try 
to correct the interference by one or more of the following measures: 
 

-

 

Reorient or relocate the receiving antenna. 

-

 

Increase the separation between the equipment and receiver. 

-

 

Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected. 

-

 

Consult the dealer or an experienced radio/TV technician for help. 

 
 
 

Information on Disposal for Users of WEEE 
 

 

 

 
 
This symbol on the product and / or accompanying documents means that used electrical and electronic 
equipment (WEEE) should not be mixed with general household waste. For proper treatment, recovery 
and recycling, please take this product(s) to designated collection points where it will be accepted free 
of charge. 
Alternatively,  in  some  countries,  you  may  be  able  to  return  your  products  to  your  local  retailer  upon 
purchase of an equivalent new product. 
 
Disposing of this product correctly will help save valuable resources and prevent any potential negative 
effects  on  human  health and  the  environment,  which  could  otherwise  arise  from  inappropriate  waste 
handling. 
 
Please contact your local authority for further details of your nearest designated collection point. 
 
Penalties  may  be  applicable  for  incorrect  disposal  of  this  waste,  in  accordance  with  your  national 
legislation. 
 
For disposal in countries outside of the European Union 
This symbol is only valid in the European Union (EU). If you wish to discard this product, please contact 
your local authorities or dealer and ask for the correct method of disposal. 

Summary of Contents for PRO CV to MIDI













Reviews: