SAFETY INTERLOCK ACCESS CONTROL SYSTEM
5
INPUT FEATURES:
Safety Loop:
Door 1: Normally closed contacts
Door 2: Normally closed contacts
Auxiliary: Normally closed contacts
Emergency access: Normally closed contacts
Emergency stop: Normally closed contacts
• Voltage across inputs: 12VDC
• Current: 61mA nominal
• Inputs can be daisy chained together to offer multiple external options
Remote Start:
• Voltage across inputs: 12VDC
• Current: 61mA nominal
Exit Request:
• Voltage across inputs: 12VDC
• Current: 24mA nominal
OTHER COMPONENTS:
Chime:
• Rated voltage: 12VDC
• Current rating: 35mA
• Sound pressure: >80dB @ 12VDC (at 1 foot)
SYSTEM INSTALLATION
4-1.
Remove components from packaging and verify that all components have been received and are not
damaged.
4-2.
Mount components in a visible location, where labels can be read and controls can be operated easily.
4-3.
Create a template by either tracing each component outline on paper, or hold the product firmly against the
wall and mark the hole locations prior to mounting equipment.
4-4.
We recommend mounting the lowest point of the control panel between 48-56 inches above finished floor.
4-5.
External wiring should be located within conduit or within the wall.
4-6.
A basic wiring layout diagram is included with this manual (Section 10-1). Custom wiring drawings can be
provided on request. All components should be wired by a certified electrician.
4-7.
Please call 1-800-432-2323 if you have any questions about the installation of this product.
The following installation checklist is only a guide and is intended to be used by qualified service technicians. The
sequence of the checks is arbitrary. Actual sequence will be determined by the technician performing the checks.
General System Information
The system is considered engaged when all of the following conditions are met:
4-8.
‘START’ LED is illuminated.
4-9.
‘MAGLOCK ON’ LED is illuminated.
4-10. All doors to the protected room are locked (if equipped with magnetic or electronic locks).
4
.
Summary of Contents for Entry-Guard
