Installation and Configuration 3
Man-1453 Rev.01
Sigma ZXT SI Product Manual
5
Mounting the Unit
The unit should be mounted on a dry, flat surface at eye height to the display in a level position such that the enclo-
sure is not distorted.
Screws or bolts 5mm diameter, minimum 40mm in length with corresponding wall plugs as appropriate.
The unit should be positioned in an accessible place as agreed with the end user. Suitable fixings should be used
at all fixing points such that the unit is securely mounted and is not liable to move once fixed. The unit should not be
mounted in another enclosure or near sources of excessive heat. Cables should be connected through suitable ca-
ble glands fitted to the knock-outs (20mm dia.) provided.
It is advised to use the cable entry knock-outs provided. Drilling of additional holes is not recommended as this can
cause damage to the enclosure and internal components.
Figure 3-1
Enclosure Back-Box Dimensions (mm). Not to scale.
Figure 3-2
Weather Proof Enclosure Back-Box Dimensions (mm). Not to scale.
186.0
143.0
4x 6Ø
132.0
47.0
244.0
257.0
4x 4.5Ø
134.0
47.0
168.0
