Adding/Removing Status Indicators & Ancillary Boards 6
Man-1453 Rev.01
Sigma ZXT SI Product Manual
16
The following screen-shot shows an
example
of a system with OPERATIONAL, NONE and UNEXPECTED devices.
Figure 6-5
Example Remote Bus Status
7. To add a device use the
left and right
arrows to select the unexpected device to add in the device status line
and press the enter key (INSTALL). This will log the device onto the panel and the unexpected device fault will
clear.
The status will change to OPERATIONAL in the status line and the graphic symbol for this address will change
to
□
. The status LEDs should display their normal state and any buzzers will stop sounding. Complete this for
all unexpected devices until all devices are logged on to the panel.
****remote bus status****
ANC AT 1 :UNEXPECTED
-SI-
1 . 3 . 5 . 7
-ANC-
1 . 3 . 5 . 7
x
BACK INSTALL
