5
TROUBLE SHOOTING GUIDE
Problem
Machine will not run.
Machine hums without starting.
Buildings circuit breaker ‘pops’.
Machine wobbles excessively.
Handle does not stay in locked position.
Cause
ˇ Machine not plugged in.
ˇ Damaged cord or plug.
ˇ No power at wall outlet.
ˇ Available voltage too low.
ˇ Misadjusted switch in motor.
ˇ Malfunction in cord or motor.
ˇ Compressed pad.
ˇ Warped padholder or brush.
ˇ Handle lock requires adjustment.
Solution
ˇ Locate a properly grounded outlet, and plug
in machine.
ˇ Contact your authorized service center.
ˇ Check buildings fuses or circuit breakers.
ˇ Do not use extension cords! Contact a
certified electrician.
ˇ Contact your authorized service center.
ˇ Contact your authorized service center.
ˇ Twist the handle to put additional pressure
on the edge of pad to seat the pad in to the
padholder evenly.
ˇ Replace any warped components.
ˇ Under the “MAINTENANCE’ section of the
manual, see handle lock lever adjustment
https://harrissupplyind.com - To Order Parts Call 608-268-8080
