Part 1: Cleaning the UF Membrane
Open the box and remove the parts. Tally the contents with the 'Items
in the Box' list (page no. 1). Wash all the plastic parts with clean water
and wipe dry with a clean cloth before assembling.
l
Once assembled, fill the inner tank with water. Wait till the filtration
is complete
l
Drain the water collected in the Outer Tank, initially. This water should
be drained even if all parts have been washed thoroughly before
installation
l
Refill the Inner Tank when empty
l
To refill the purifier, twist the Top Lid and remove it. Pour the raw water
slowly into the Inlet Funnel, ensuring that water does not spill
l
After filling the Inner Tank, close the Top Lid
1
2
3
10
12
Take 50 ml of pure water in the
syringe and inject it into the
Membrane Cartridge (opposite to
the direction of flow) to soak the
new membrane
Push-fit the UF Membrane by
pressing into the fitting of
the Inner Tank.
NOTE: Be careful to insert the
UF Membrane opposite to the
direction of water flow.
6 KENT RO SYSTEMS LTD.
+
Gold Installation Manual 7
Fequency
l
The UF Membrane should be cleaned at least once in a month. However, if the water flowing from
Inner Tank to the Outer Tank reduces sharply, Membrane can be cleaned even earlier
l
It is essential to change the UF Membrane once in a year
Remove the Inner Tank
Turn the Inner Tank upside down
Place it on a horizontal surface;
Take 50 ml of pure water in the
given syringe. Fit the syringe into
the opening of Membrane
Cartridge and slowly inject water
from syringe into the cartridge
(back-flushing). Perform this step
once. Repeat if required.
3
2
1
Assemble the Tap on the
Outer Tank
Place the Bottom Stand on
a flat surface
Place the Outer Tank above the
Bottom Stand
Place the Inner Tank with UF
Membrane on the Outer Tank
5
6
4
8
9
Place the Top Cover on the
assembled tanks
Before Installing the Filter Assembly,
wash it under a running tap. Shake,
if required, to remove Carbon
particles from the new Filter
Place the Filter Assembly on
the top of the Tank
7
The purifier assembly is
now ready
11
Tighten the Top Lid by pressing it
down and rotating clockwise
Place the Top Lid on top of the
Tank Assembly
+
Setting up your KENT Gold
+
Maintaining your KENT Gold