KENT 92804 Owner'S Manual Download

Page: 58 / 60

For how long does this Limited Warranty last?
The frame is warranted for the usable life of the bicycle. Kent will replace the frame at no

charge, should it fail in any weld point when the cycle has been used in a normal manner,

and determined by our inspection Kent will also replace the bicycle fork if it should fail at

any weld point.
You must receive prior authorization from Kent Customer Service, before returning any

product or parts. The battery is warranted for one year. All other components are warranted

against defects for six months from the date of purchase when properly assembled and

used in a normal manner.

What will Kent do?
We will replace, without charge to you, any frame, fork, or component found to be

defective by Kent. CONSUMER MUST PAY ALL LABOR AND TRANSPORTATION CHARGES

CONNECTED WITH THE REPAIR OR WARRANTY WORK.

How do you get service?
Call the Customer Service Department (8am-4pm E.S.T.) at 1-800-451-KENT (5368).

All warranty claims should be made to:
Kent International Inc.

60 E. Halsey Rd.

Parsippany, NJ 07054 USA.

What rights do you have?
This limited warranty gives you specific legal rights. You may also have other rights which

vary from State to State.

NOTE: BEFORE TRANSPORTING THE BIKE AND/OR BATTERY,

CALL CUSTOMER SERVICE AT 1-800-451-KENT (5368) FOR

SPECIFIC DETAILED INSTRUCTIONS.

LIMITED WARRANTY

Summary of Contents for 92804





























































Search results

Summary of Contents for 92804

Reviews:

Related manuals for 92804

Brands by name

Popular brands

KENT 92804, Owner'S Manual

Search results

Summary of Contents for 92804

Reviews:

Related manuals for 92804

Brands by name

Popular brands