KENT 92804 Owner'S Manual Download Page 57 | Manualshive

Page: 57 / 60

background image

55

This Limited Warranty extends only to the original retail purchaser, who must produce proof

of purchase in order to validate any claim. This warranty is not transferable to anyone else.

What does this Limited Warranty cover?
This warranty covers all parts of the bicycle to be free of defects in workmanship and

materials. It does not cover abuse, misuse, or alterations.

What must you do to keep the Limited Warranty in effect?
This warranty is effective only if:

- The bicycle is completely and correctly assembled and maintained.
- The bicycle is used under normal conditions for its intended purpose, by a person that

properly fits and is capable of controlling the bicycle.

- The bicycle receives all necessary service maintenance and adjustments.

What is not covered by this Limited Warranty?
This warranty does not include labor and transportation charges. The bicycle is designed for

general transportation and recreational use only. This warranty does not cover normal wear

and tear, paint, rust, normal maintenance items, personal injury, or any damage, failure, or

loss that is caused by accident, improper assembly, maintenance, adjustment, storage, or

use of the bicycle.

This Limited Warranty will be VOID if the bicycle is ever:

- Used in any competitive sport.
- Used for stunt riding, jumping, aerobatics or similar activity.
- Installed with a non-standard motor or modified in any other way.
- Ridden by more than one person at a time.
- Rented or used for commercial purposes.
- Used in a manner contrary to the instructions in this Owner’s Manual. Kent will not be

liable for incidental or consequential loss or damage, due directly or indirectly from use

of this product.

LIMITED WARRANTY

«
...
55
56
57
58
59
...
»

Summary of Contents for 92804





























































Reviews:

No comments

Related manuals for 92804

Brand: Hyena Pages: 13

Brand: TRIOBIKE Pages: 36

Mercedes-Benz Formula E Team

Brand: n+ Pages: 17

FRONT DERAILLEUR ROAD

Brand: microSHIFT Pages: 1

Brand: URBANGLIDE Pages: 52

METAL BALANCE BIKE

Brand: SEVEN Pages: 12

Brand: Kidotec Pages: 13

Brand: Planet Bike Pages: 2

Brand: Planet Bike Pages: 2

Brand: Grace Pages: 63

Brand: DAHON Pages: 2

Brand: Factor Pages: 20

Brand: VOXOM Pages: 2

Brand: CAMPAGNOLO Pages: 17

Brand: ibis Pages: 38

Brand: OFF CARR Pages: 27

Brand: VDO Pages: 23

Brand: iGPSPORT Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands