Kent Euroclean Rainmaker C, Instructions For Use And Parts List

Page: 8 / 25

FORM NO.56041562 / Rainmaker ™ C - 7
KNOW YOUR MACHINE
KNOW YOUR MACHINE DESCRIPTIONS
Operator Handle (1) - Operator holds this to move the machine from one location to another.
Lift Handle (2) - Operator grasps this handle when lifting the machine.
Solution Tank Lid (3) - Fill Solution Tank here with warm water and chemicals.
Recovery Tank Lid (4) - The Recovery Tank can be flushed out by running clean water into this
opening with the Recovery Tank Drain Hose open. The vacuum float Shut-OFF can also be
accessed through this opening for maintenance.
Switch Plate (5) - The switches that operate the motors are located here, as well as indicator
lights for the heater.
Vacuum Hose Connector (6) - This is where the vacuum hose attaches to the machine.
Solution Hose Connector (7) - This is where the solution hose attaches to the machine.
Latches (8) - These latches can be opened if the base compartment needs to be accessed. The
latches are normally closed to keep the machine sections held together tightly.
Drain Gate (9) - This gate is opened to allow the dirty recovered water to empty.
1
2
3
4
5
6
8
7
9