PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase.
IMPORTANT! NEVER COVER THIS HEATER!
SPECIFICATIONS
Model No TWCT10020
Voltage 220-240VAC 50HZ
Wattage 2300W
SUPPORT AND TECHNICAL ADVICE
North Shore City, Auckland, New Zealand
Monday
– Friday 8am-5pm
Phone: 0800 232 633
CARE AND CLEANING
The appliance requires regular cleaning to ensure trouble free operation:
Unplug the appliance from the mains supply before cleaning.
Ensure that the appliance has been allowed to cool down completely before cleaning.
Use a damp cloth (not wet) to wipe the exterior of the appliance to remove dust and dirt.
Never use solutions such as benzene, thinners or polishing agents.
Use a vacuum cleaner to remove dust and fluff from around the grills.
Ensure the appliance is dry before plugging back into the mains supply.
Do not attempt to dismantle the Ceramic Heater. There are no user serviceable parts. For service or
repair, contact an authorised electrical service technician.
SAFETY DEVICES
This appliance has three protection devices:
1.
Tilt switch - this will automatically turn the appliance off if the appliance is not in the appropriate
operating position.
2.
Resettable thermal link - this will automatically disconnect the power to the appliance at a pre-set
overheat temperature. After cooling down it will reset and power on again. If this occurs, investigate
what is causing the appliance to overheat.
3.
Thermal fuse - this disconnects the appliance permanently in case of overheating. (It is non
resettable).
CAUTION: The appliance generates heat during use. Proper precautions must be taken to prevent the
risk of burns, scalds, fires or other damage to persons.
REMOTE CONTROL
The remote control buttons perform the same functions as those on the Control
Panel of the unit.
For best results, aim the remote directly at the display screen on the front of the
heater. The remote has a 3 metre range of operation.
The remote control requires one "CR2032" type battery. Remove the plastic tab
from the battery and battery terminal prior to first use of the remote control.
