ASSEMBLY
Before using the heater, the feet (supplied separately in the carton), must be fitted to the unit.
The screw pack to attach the feet to your heater will be taped to either one of the feet for your
heater, or taped to the plug.
Carefully turn the Main Body upside-down on a scratch-free and stable surface. Be careful to prevent
damage to the cosmetic finish or your floor surfacing.
Each foot requires two screws to attach them securely to the heater. Two holes are pre-drilled in each
foot and in the base of the heater. Align the feet with the holes, insert the screws and use a screwdriver
to secure the feet to the base of the heater. Return to upright position.
COMPONENTS
Feet x 2
Main Body x 1
Screws x 4
WARNING: Operate the heater in the normal upright position only with the feet attached to
the bottom. Any other position could create a hazardous situation.
