User Manual
KS-PH-220-BASIC | Portable
pH/mV Meter
Kensington Scientific
22a Cavan Rd, Dry Creek
South Australia, 5094
[email protected]
www.kensingtonscientific.com.au
KEYPAD
The KS-PH-220-BASIC has six (6) multi-function keys. Below are their names and functions
Key
Description
1. Press this button to activate HOLD function
2. Freezes the measured value on the display, press the key again to resume measuring.
3. In the calibration or setting mode, exits current mode and returns to measurement.
Press to enter SETUP mode
Press to activate temperature setting mode
1. In the measurement modem press this key to store current measured value.
2. In the temperature setting mode, pressing the key increases the value by 0.1. Press and hold the
key to increase the value by 1.
3. In memory mode, press to search the previous saved measurements
1. In the measurement mode, press this key to recall stored data in the memory
2. In the temperature setting mode, press to search the next stored data
1. Toggles between pH and mV measurement modes
2. In the setup mode, press this key to confirm option or input values.
CONNECTING THE pH ELECTRODE
1. Take out the pH electrode from the carrying case.
2. Insert the connector of the electrode into the BNC connector socket on the meter. Rotate and push the connector
until it locks.
3. Do not pull on the sensor cord once the electrode is connected to the meter.
USER SETTINGS
SELECTING THE TEMPERATURE UNIT
1. Press SETUP key to enter the setup menu
2. Press or
key to select the ‘Temperature Units’ option
3. Press ENTER key to confirm. The ‘C’ indicator should begin flashing.
4. Press or keys to select the desired temperature units (°C or °F)
5. Press ENTER to confirm.
