Kensington KS-DO-10, User Manual

Page: 3 / 8

User Manual
KS-DO-10 |Pocket Dissolved Oxygen Tester
Kensington Scientific
22a Cavan Rd, Dry Creek
South Australia, 5094
helpme@kensingtonscientific.com.au
www.kensingtonscientific.com.au
SETUP MENU
The KS-SAL-
20 contains integrated setup menu that allows you to customize your tester’s features to fit your
measurement requirements.
Parameter Description Options Description
SALT Salinity Coefficient 0.0 (Default) Setting range: 0 to 35 ppt
PRES Atmospheric Pressure
Coefficient 760 (Default) Setting range: 450 to 850
mmHg
CAL Calibration Points 1 (Default) 1 point calibration
2 2 points calibration
UNIT Measurement Unit mg/L (Default) Concentration unit
ppm Concentration unit
% % saturation
°C (Default) Celsius
°F Fahrenheit
°C Temperature calibration CAL Temperature calibration
mode
HOLD Auto-Hold YES Automatically freezes
stable readings
NO (Default) Disable
OFF Auto-off YES (Default) Automatically turns off
tester after 8 seconds of
idle
NO Disable
RST Reset YES Restores factory settings
NO (Default) Disable
SETTING OF DEFAULT PARAMETERS
1. Press the CAL button to enter setup menu. The first display should be the current salinity coefficient.
2. Press CAL again to set the desired value. Press ENTER to confirm.
3. The tester should then display the atmospheric
pressure setting. The display should show ‘760mmHg’.