S-MIX-PRO1600
2
receiver etc. to the HDMI input port of the matrix.
2.Connect the output port of the matrix to HD display or HD projector with HDMI input port. Notice: It’s
better to u
se High-Speed HDMI Cable when the transmission distance is too long.
3.
Firstly power on the signal source
，
then the matrix(with power supply)
，
finally devices connected to the
output port .
4.Plug in power to each device in the same order .
5.If all devices are connected properly, every display device should display the specified signal to make
sure the devices are normal
. If one of the displays failed to receive signal correctly, enter the menu of
display, adjust the resolution from MIN to MAX until the signal is displayed normally. A 24 Hz vertical
refresh rate may work better than 60 Hz or higher.
The following diagram is S-Mix-Pro1600 matrix switching system application:
4.Standard Packing list
Please check the outer package before using this product. Please contact us if the product is faulted or
