S-MIX-PRO1600
13
In the "Video Control" column, you can adjust the brightness and contrast of the input board, reset the
board, etc. In the "Name" column, you can rename the name of the signal.
Figure6.3.4 Input board central control, video control, naming operation interface
2) Output card
:
After you double-click any output signal on the “SWITCH” interface and pop up the
interface as shown in Figure 6.3.5, you can set the output signal of this circuit. In the “control” column, we
can The camera and other devices connected to the circuit board card are controlled (this function needs
to obtain relevant information from the equipment supplier, and the command transmission format is
shown in Table 1). In the “Video Control” column, we can select the various resolutions supported by the
output board, adjust the brightness, contrast, saturation and other settings of the signal screen. In the
“Name” column, you can rename the name of the signal.
Figure6.3.5 output board control, video control, naming operation interface
