S-MIX-PRO1600
11
Figure6.3.1 Network connection
2
）
Serial connection :
Use a direct serial cable to connect the computer and matrix, double-click
to open the control software, click the "SETUP" button, select the serial port connected to the matrix,
for example, "COM2", then select at the serial device "COM2", click "serial connection", when all the
buttons in the lower right corner show green, the connection is successful. Click "Load" at this time
to display some configuration of the matrix, as shown in
Figure6.3.2
Figure6.3.2 Serial port connection
3
）
Change Matrix IP :
After ensuring that the matrix is connected to the computer normally,
