Kennell LTC2-A1202, User Manual

Page: 31 / 40

23
<SYSTEM>
DISPLAY INFO OFF
RATIO SPEED ON
PRESET FREEZE OFF
RS485 HALF-DUPLEX-1
“ONE PUSH”: when in “ONE PUSH
TRIGGER” mode, aim the camera at a pure
white object (say a white paper), then press
OK button.
“MANUAL”mode:
R.GAIN and B. GAIN
value can be chosen from 0~255.
Pan/Tilt/Zoom
PAN/TILT/ZOOM is used to change
pan/tilt/zoom value, available options:
PAN/TILT SPEED: 1, 2, 3, 4,5, 6, 7, 8 the
bigger the number is, the faster the speed is.
The speed is the fastest in 1x zoom compared
to other zooming times.
High speed: 15°~50°
（
5°/step
）
Low speed: 4°~11°
（
1°/step
）
PAN/TILT LIMIT: ON/OFF, once it is set as
ON, below limit value can be set
UP: -30°~+90°, adjustable 1°/step;
DOWN: -30°~+90°, adjustable 1°/step;
LEFT: -170°~+170°, adjustable 1°/step;
LIGHT: -170°~+170°, adjustable 1°/step.
D-ZOOM LIMIT : X1, X2, X3, X4, X5, X6, X7,
X8, X9, X10, X11, X12.
PTZ TRIG AF: Turn ON / OFF the auto focus
when the camera pans / tilts / zooms.
POWER UP ACT: PRESET 1, PRESET 2,
PRESET 3, PRESET 4, PRESET 5, PRESET
6, PRESET 7, PRESET 8, PRESET 9, HOME
System
DISPLAY INFO: Turn ON / OFF display of
pan / tilt angle and prompt message.
RATIO SPEED: When RATIO SPEED is set as
ON, the camera
’s pan and tilt speeds are based
on zooming times, that is, more zooming, less
pan and tilt speed; less zooming, more pan and
tilt speed.
PRESET FREEZE: When it is on, during a
regular preset call, the video will be frozen at
point A till Point B. At Point B, the video will be
displayed normally.
RS485: HALF-DUPLEX-1, HALF-DUPLEX-2
HALF-DUPLEX-1: RS-485 half duplex mode,
in VISCA protocol, after executing the
<PAN TILT ZOOM>
PAN/TILT SPEED 8
PAN/TILT LIMIT ON
UP +90
DOWN -30
LEFT +150
RIGHT -150
D-ZOOM LIMIT X4
PTZ TRIG AF ON/OFF
POWER UP ACT HOME