Kennell LTC2-A1202, User Manual

Page: 16 / 40

8
camera is tightly fixed onto the bracket
before your hands leave the camera.
BLS Requirements
BLS device shall be installed up-left or
up-right of the blackboard, with a distance of
15~20cm from the blackboard. The view angle
of the camera built in BLS is 90°. Please
capture the camera view and adjust the
installation position till the camera view is fully
covered to the whole blackboard and the
bottom boundaries of blue rectangle and the
blackboard in parallel, shown as follows:
SOFTWARE
CONNECTION
Setup RoomTracker from the disc in the
packing, and enter the main interface as
following.
The software will auto search all devices from
the same network and list all those found in
the camera list. Press the Search button and
the software will search again.
In CONFIGURE menu, select a camera in
the list to change camera parameters.
Network: Set camera IP and port. App port is
for SDK. Stream media is for rtsp and rtp
access to the camera (such as access to main
stream via VLC). Network type is to identify
camera IP type and address.
System: set camera name, time, RTSP (main
channel and sub channel), update PWD, and
reboot camera;