Kennell LTC2-A1202, User Manual

Page: 19 / 40

11
PARAMETERS
SETTING
Setting Process
Preset 0: It is a position that can be
configured to have the camera move to once
tracked object gets lost, recommended to set
at a full view image of the lecturing area. See
basic parameter settings for details.
Preset 1: Preset 1 is the position where
tracking starts, preferred to be set at Podium;
to configure it, move the camera
’s
Pan/Tilt/Zoom to put the lecturer in the
appropriate size and position in the image,
then set it as preset 1. In some other cases,
the preset 1 is also useful: after camera
finishes calibration, it will sit at preset 1; once
tracking object gets lost, the camera can be
configured to move to preset 1; when the
camera starts auto zooming, its zooming
times is also based on preset 1’s zooming
times.
Preset 2: the position of BLS to determine the
P/T/Z level of the LTC .
Tracking Setting