Kennell LTC2-A1202, User Manual

Page: 22 / 40

14
degree of preset 2. It’s used when preset 2
does not cover the blackwriting area.
Startup Action: The action to be performed
when the camera is powered on. Default is
non tracking.
Control Mode: choose tocontrol camera via
network or serial port;
Transport Protocol: once
“Network” is
chosen as
“Control Mode”, choose TCP or
UDP as transport protocol at this option;
Camera as: once
“Network” is chosen as
“Control Mode”, choose “Client”to actively
communicate with network controller, choose
“Server”to await to be communicated from
network controller;
Controller IP and Port Address: once
“Network” is chosen as “Control Mode”,
configure network controller IP address and
Port at these two frames;
Network Test: once
“TCP” is chosen, click
this button to test if connection has been
made.
BLS
Capture the camera view and adjust the
installation position till the camera view is fully
covered to the whole blackboard and the
bottom boundaries of blue rectangle and the
blackboard in parallel, shown as follows:
Basic