Kenmore Premalite 721.31160, Use And Care Manual

Page: 19 / 69

18
To clean the Pet Handi Mate
®
:
1. Remove the four screws on the
bottom of the Pet Handi Mate ® .
2. Lift off the cover.
3. Remove any debris.
To reassemble:
4. With the hose connector angled up as
shown, press the top of the Pet Handi
Mate
®
onto the bottom.
5. Insert and tighten screws removed in
Step 1. Do NOT overtighten the
screws.
Pet Handi Mate
®
CARE & CLEANING
WARNING
Electrical shock and personal
injury hazard.
Always unplug power cord from
electrical outlet before performing
any service on vacuum cleaner.
Failure to do so could result in
electrical shock or personal injury
from vacuum cleaner suddenly
starting.
Frequently check the agitator brush
area for hair, string, and lint buildup.
If buildup becomes excessive, use the
following procedure to remove buildup
and clogs.
Remove the Agitator
Brush Cover:
1. Unplug the vacuum cleaner. Press
the left foot pedal to release the
handle. Lower the handle until the
vacuum cleaner is lying flat on
the floor.
2. Turn the vacuum cleaner over, so that
the agitator is facing up.
3. Rotate the two cover retainers to
unlock the agitator cover.
4. Press in on the two tabs and rotate
the agitator cover up and off.
Agitator Maintenance
78017_Kenmore vac_EN_final 10/17/07 9:00 AM Page 18