Maintaining Your Water Optimizer
15
Maintaining Your Water Optimizer
Storing & Relocating Your Water Optimizer
At some point, you may need to store or relocate your Water Optimizer. Should one of
these situations be the case for you, below are a few simple steps to prevent any damage
from occurring.
1.
First, if the cooling and/or heating systems are powered on, flip
X
Hot Mode Power Switch
and
Y
Cold Mode Power Switch
into the down position
to power off.
This should always be done prior to shutting off water supply.
2.
Shutoff water flow to your appliance by turning the blue handle on the
C
1/4 in. Quick Connect Shutoff Valve
(see Installation Guide)
connected to your
Optimizer’s
BB
Source Input Port
located at the back of the appliance.
3. Grab a container (preferably with high sides) , like a bucket or pitcher, and place it on
the floor in front of your Water Optimizer.
4. Rotate your Optimizer counter-clockwise 90 degrees and slide forward towards
the edge of your counter-top (or whatever surface it is resting on) until roughly
30% of your Optimizer’s left side is extending over the edge. This will expose
JJ
Appliance Drain Port
.
Be sure to keep it braced with your body so it does not fall!
5. Ensure your container is directly below the
JJ
Appliance Drain Port
.
JJ
Summary of Contents for KM1000
Page 2: ...KM1000 KM1000B ...
Page 16: ...Using Your Water Optimizer Using Your Water Optimizer 12 ...
Page 26: ...Notes Notes 22 ...
