Kenmore 795.71042.01 Service Manual Download Page 6 | Manualshive

Page: 6 / 66

background image

3. DISASSEMBLY

- 6 -

3-1 REMOVING AND REPLACING REFRIGERATOR DOORS

To remove the left refrigerator door:

To remove the Right refrigerator door:

Open the door. Remove the top hinge cover screw (1).
Lift up the cover (2).
Remove the cover.
Rotate the hinge lever (3) clockwise.
Lift the top hinge (4) free of the hinge lever latch (5).

IMPORTANT:

When lifting the hinge free of the latch,

be careful that the door does not fall forward.

Open the door. Remove the top hinge cover screw (1).
Use a flat-head screwdriver to pry back the hooks (not
shown) on the front underside of the cover (2).
Lift up the cover.
Remove the cover.
Disconnect all the wire harnesses (3).
Remove the grounding screw(4).
Rotate hinge lever (5) counterclockwise.
Lift the top hinge (6) free of the hinge lever latch (7).

IMPORTANT:

When lifting the hinge free of the latch, be

careful that the door does not fall forward.
Lift the door from the middle hinge pin and remove the
door.
Place the door, inside facing up, on a nonscratching
surface.

CAUTION:

Before you begin, remove food and

bins from the doors.

WARNING

Explosion Hazard

Disconnect electrical supply to the refrigerator before
installing. Failure to do so could result in death or
serious injury.
Do not put hands or feet or other objects into the air
vents, base grille, or bottom of the refrigerator.
You may be injured or receive an electrical shock.
Be careful when you work with the hinge, base grille,
and stopper. You may be injured.

«
...
4
5
6
7
8
...
»

Summary of Contents for 795.71042.01



































































Reviews:

No comments

Related manuals for 795.71042.01

Brand: Zanotti Pages: 44

Brand: Zanussi Pages: 24

Brand: Samsung Pages: 104

Brand: Zanussi Pages: 12

Brand: Zanussi Pages: 24

Brand: Jenn-Air Pages: 40

Brand: Haier Pages: 10

Brand: Haier Pages: 10

Brand: inventum Pages: 24

Brand: Fridgemaster Pages: 20

Brand: Heinner Pages: 36

Brand: EdgeStar Pages: 18

Brand: Amica Pages: 28

FX Series FX1-4N1A

Brand: Randell Pages: 2

Brand: Summit Pages: 1

Brand: Delfield Pages: 4

Brand: Daewoo Pages: 39

Brand: Smeg Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands