background image

29

Setting Oven Controls

Arranging Warmer Drawer Rack Positions

The warmer drawer rack can be set in two positions to accom-
modate foods and any items that need to be warmed or kept 
warm. The rack must be placed in the vertical position in one of 
two ways.

Place the rack in the upright position (

Figure 33

) to place low 

profile food items under and on top of the rack (for example, 
rolls or biscuits on top of the rack and a casserole dish under).

In the downward position (

Figure 34

) to allow the placement of 

light weight food items and empty dish ware (for example, rolls 
or pastries and dinner plates).

Important notes:

Use only plates, utensils and cookware recommended for 
oven and ceramic cooktop use. Do not use plastic wrap or 
aluminum foil to cover food. Plastic or aluminum foil can 
melt onto the cooktop.

Warmer Drawer Settings

Refer to the warmer drawer recommended food settings below. 
If a particular food is not listed, start with the medium level, and 
adjust as needed.

 Do not place flammable items such as plastic 

salt and pepper shakers, spoon holders or plastic wrappings on 
top of the range when it is in use. These items could melt or 
ignite. Potholders, towels or wooden spoons could catch fire if 
placed too close to the surface elements. Do not allow aluminum 
foil, empty glass-porcelain cookware or any material that can 
melt to make contact with the ceramic cooktop. 

Figure 33:  Warmer Drawer in upright position

Figure 34:  Warmer Drawer in downward position

Upright Position

Downward Position

Table 5:  Suggested settings for warmer drawer

Food Item

Heating level

Breads/ Pastries

LO 

Casseroles

LO 

Dinner Plates with food

LO 

Eggs

LO 

Gravies

LO 

Meats

MED 

Sauces

MED 

Soups (Cream)

MED 

Stews

MED

Vegetables

MED 

Fried foods

HI 

Hot beverages

HI 

Soups (clear)

HI 

Summary of Contents for 790.4260 Series













































Reviews: