Kenmore 596 Series, Use & Care Manual

Page: 11 / 64

ENGLISH
FRANÇAIS
ESP
AÑOL
11
How to level your
refrigerator
If your refrigerator requires an ice maker
water supply connection, refer to
How
to Connect the Water Supply (page
10) section before leveling your
refrigerator.
To protect personal property or
refrigerator from damage, observe
the following:
➢
Protect soft vinyl or other flooring
with cardboard, rugs, or other
protective material.
➢
Do not use power tools when
performing leveling procedure.
CAUTION
MATERIALS NEEDED
➢
3 ⁄
8
" hex head driver
➢
Level
1. Remove toe grille and bottom bracket
covers (see previous instructions).
2. Turn both front adjustment screws (A)
clockwise to raise and counter-
clockwise to lower.
4. Turn stabilizing legs (C) clockwise
until firmly against floor.
5. Turn front roller adjustment screws
(A) 2 to 3 times counterclockwise, so
that full weight of refrigerator rests on
stabilizing legs (C).
A
B
A
C
3. Turn both rear adjustment screws (B)
clockwise to raise and
counterclockwise to lower.
6. Using a level, make sure front of
refrigerator is
1 ⁄
4
" (6 mm) or
1 ⁄
2
bubble
higher than back of refrigerator. See
leveling step 3 for assistance.
7. Replace toe grille and bottom bracket
covers. See markings on inside of toe
grille to insure proper placement.
➢
Snap bottom portion into place
first.
Press down on top part of
grille until top portion snaps into
place.