18 • 464810208
Burner, Firebox and Control Knobs
11
34
5mm Fiber Washer
Qty: 6
Control Knob
27
#10-24X1/2” Screw
Qty: 6
13
#10-24 Flange Nut
Qty: 4
B
C
34
27
13
Burner Tube
Valve
Ignitor wire
Firebox
Burner Assembly
A
27
34
‘
Place burner assembly into firebox (A). Fasten the burner assembly to the firebox using
5mm fiber washers
and
#10-24 x 1/2”
machine screws.
‘
Place firebox onto upper firebox supports with burner tubes below heat shield.
Make sure burner tubes are correctly engaged
. If
burner is not leveled from left to right, adjust the two screws attaching valve stems to control panel. Attach ignitor wire to ignitor
(B)
.
‘
Attach firebox with
#10-24x1/2" screws, 5mm fiber washers
and
#10-24 flange nuts (C).
‘
Push control knobs onto valve stems
(C)
.
