27
#10-24X1/2” Screw
Qty: 2
16 • 464810208
7
Control Panel and Upper Firebox Supports
Control Panel
Upper Firebox
Support
Back of
cart
13
#10-24 Flange Nut
Qty: 8
17
#10-24x2" Screw
Qty: 8
17
13
8
Valve/ Hose/ Regulator
27
Hex Nut
Ignitor Cap
Back of cart
A
B
+
-
‘
Stand cart upright.
“
In
front
,
fit
control
panel
between
left
and
right
legs
.
Insert
#10-24x2" screws
to
hold
panel
in
place
.
Place
upper
firebox
supports
onto
screws
making
sure
angle
side
is
facing
the
front
and
attach
with
#10-24 flange nuts.
‘
In back, attach upper firebox support with
#10-24x2" screws
and
#10-24 flange nuts.
Valve/Hose/Regulator and Electronic Ignition Module
‘
‘
Remove ignitor cap and plastic hex nut from Electronic Ignition module assembly. Insert module into the opening on control panel,
and attach with the removed hex nut. Place AA battery into module slot with positive end (+) facing outward. Szcrew ignitor cap
onto module
(B).
Attach valve/hose/regulator assembly to control panel with
#10-24x1/2" screws (A).
Electronic Ignition Module
