background image

CAUTION 

Read and follow all instructions before operating fan. Do not use fan if any part
are damaged or missing.

WARNING 

1. To reduce the risk of fire or electrical shock, do not use this fan with any
    solid-state speed control device.
2. If the supply cord is damaged, it must be replaced by the manufacturer or its
    service agent or other qualified person in order to avoid a hazard.
3. This appliance has a polarized plug (one blade is wider than the other). To
    reduce the risk of electric shock, this plug is intended to fit in a polarized outlet
    only one way. If the plug does not fit fully in the outlet, reverse the plug. If it
    still does not fit, contact a qualified electrician. Do not attempt to defeat this
    safety feature.
4. Do not leave the fan running unattended.
5. Keep electrical appliances out of reach of children. Do not let them use the
   appliances without supervision.

RULES FOR SAFE OPERATION

1. Never insert fingers or any other objects through the fan housing when the
    tower fan is running. Unplug the fan when moving it from one location to
    another.
2. Disconnect the fan before cleaning.
3. To avoid overturning, be sure the fan is on a stable surface when operating it.
4. To reduce the risk of electric shock, DO NOT use the fan by a window.
5. The rules about cord and plug as below:
(1) This product employs overload protection (fuse). A blown fuse indicates an
    overload or short-circuit situation. If the fuse blows, unplug the product from the 
    outlet. Replace the fuse as per the user servicing instructions (follow product 
    marking for proper fuse rating) and check the products. If the replacement fuse
    blows, a short-circuit may be present and the product should be discarded or
    returned to an authorized service facility for examination and/or repair.
(2) Do not operate any fan with a damaged cord or plug. Discard fan or or call
     the following customer assistance number for possible repair: 1-855-438-7899.
(3) Do not run cord under carpeting.Do not cover cord with throw rugs, runners, or 
     similar coverings. Do not route cord under furniture or appliances. Arrange cord 
     away from traffic area and where it will not be tripped over.
(4) This appliance is for private household use only.

 

 

1

READ AND SAVE THESE INSTRUCTIONS

Summary of Contents for 405.34036310











Reviews: