17
WARNING: Risk of electric shock. Electrical wiring
must be done by quali
fi
ed personnel in accordance
with all applicable codes and standards. Before
connecting wires, switch power o
ff
at service panel
and lock service disconnecting means to prevent
power from being switched on accidentally.
1. Connect House Power Cable to range hood wiring: BLACK
to BLACK, WHITE to WHITE and GREEN or bare wire
under
GREEN ground screw
.
2. Reinstall the blower cover plate (shaded part on illustration
beside) using the lock nut and
7
screws previously removed
in step 3 on page 9. Pay attention to screw 1 location; from
back of hood point of view, it must be located on left side
of the lock nut (see inset).
CONNECT THE WIRING
MOTORS
GROUND
WIRE
HOUSE
POWER
CABLE
GROUND
SCREW
1
2
3
4
5
6
7
BACK OF HOOD
LOCK NUT
1
Ducted Installation Only:
Re-install grease
fi
lters removed in step
2
on page 8,
under “Prepare the Hood”.
INSTALL THE FILTERS
“Non-ducted Filters” available by calling
1-844-553-6667
Non-ducted Installation Only:
Purchase two non-ducted
fi
lters (see part number in Service
parts list). Attach the non-ducted
fi
lters following instructions
packed with the non-ducted
fi
lters.
