20
Drip Cup Support
Drip Cup
Burner Box
Cabinet
Attach the battery box to the left panel with two screws and nuts.
Put the drip cup onto the drip cup support as shown.
Cut tie wraps holding regulator and side burner valve in place underneath grill head control panel. Be
careful not to cut igniter wires or the tie wraps holding the igniter wires in place.
With the aid of an assistant, lift and place grill head onto cart. Grill head sides go over attachment
tabs on cart. Make sure that side burner valve hangs outside the cart, and that regulator and igniter
wires hangs inside the cart. Attach head to cart with 4 screws as shown.
10
3/16-24 x 1/2
″
Screw
Qty. 4
5/32-32 x 3/8’’ Screw
Qty. 2
5/32 Nut
Qty. 2
